Diaphragm pump vacuum filtration system vacuum filtration manifold
0.45μm membrance
Features:
- Imported built-in diaphragm pump can directly pump, filter and
discharge liquid without pumping & filtering bottle for easy
installation and usage.
- Triplet filtering head design can simultaneously pumping and
filtering to improve work efficiency.
- Filtering head can be easy dismounting and mounting and
individually do moist heat sterilization.
- Multiple filtering heads can be interconvertible and available for
two kinds of specification at 47mm and 60mm.
- Pump head can quickly sterilize via flame for continuous lab
operation.
- The filter cup features a unique lip seal design that eliminates
the use of clamps and O-rings to ensure leak-free operation and
uniform microbial recovery;
- The filter membrane is pre-sterilized, that is, it can be used
immediately, and the main pollution source can be lowered to Dedu
low to improve the detection reliability;
- Direct suction filtration, no need to pump the filter bottle, easy
to install and use;
- Built-in three imported diaphragm pumps for higher efficiency;
- A smaller body that reduces the occupation of the console area;
Parameter:
| Applicable filter diameter: | 60mm |
| Number of filter | 3pc |
Size: | 42*20*15cm length width height |
Smooth and reliable filtration
Economical and practical
Save time with quick connect technology
Save operating space (saving 70%)
No need to pump filter bottles and pump protectors
1. The filter cup features a unique lip seal design that eliminates
the use of clamps and O-rings to ensure leak-free operation and
uniform microbial recovery;
2. The filter membrane is pre-sterilized, that is, it can be used
immediately, and the main pollutant source can be minimized to
improve the detection reliability;
3. Direct filtration and drainage, no need to pump the filter
bottle, easy to install and use;
4. Built-in diaphragm pump, more efficient;
5. Compact body to reduce the occupation of the console area;
6. Waterproof switch is simple and convenient;
7. Triple filter head design, can simultaneously filter and improve
work efficiency. Each filter head can also be controlled
independently, which is convenient for operators to use flexibly;
8. The filter head can be quickly disassembled and can be
sterilized by damp heat alone;
9. The filter head can be quickly sterilized by flame to facilitate
continuous experimental operation;
10. Adopt single-sided arc filter to facilitate replacement;
11. The surface of the instrument is mirror-finished for easy
cleaning and disinfection;
12. The filter cup is designed with reusable materials for
durability, cost saving and easy operation.
l Traditional equipment, such as joints, casings, suction filters,
pump protectors, Wolff bottles and vacuum pumps, require a large
laboratory space and consume a lot of time for operation and
maintenance. WINTEAM reduces the complexity of its operation with
its compact design. The Microsart® e.jet inline pump is
ergonomically designed.
l Quick connection
l The use of improved quick couplings and threaded joints on
WINTEAM filtration systems and Microsart® e.jet inline pumps makes
vacuum filtration system creation quick and easy. Simply push and
connect, pull back and disassemble to assemble and disassemble the
entire system in seconds.
l Sterile ventilation
